product description:
Many conventional HPLC uses 1ml micro vials, which is a more economical option for them. In order to ensure the proper use of the injection bottle. All test qualified micro vials are sold with polyethylene cover. The micro vials are made of clear glass, amber glass and polyethylene. Specimens of 8 x35mm miniature vials are designed for Alcott Autosamplers.
1 ml vials can be used in the autosampler and used as a sample storage bottle. The cover is made of high quality PE. Precision manufacturing tolerances,
In the manufacture of micro-vials, the control of a good manufacturing environment, the sampling of the internal insert directly into the vial. This is a good choice for a limited volume.
The same time as the above-
The design of the 9mm vial is developed by European and American manufacturers, and its design features are versatile easy to crawl, especially the use of automated injection systems. This vial is also called automatic sampling vials. And this vial compatibility is very strong, as long as the bottom of the diameter of 11.6mm of the bottle can only be used instead of 9mm vials instead.
But this vial has a drawback, because the thread is shorter, the pad is thin, easy to pierce at the same time also increased the risk, if it is pure
The blunt needle is easy to insert the shim into the bottom of the bottle, so use a pre-cut or bonded gasket and reduce the number of repetitions to reduce the risk.

inner Insert:

Used with 8mm open-top 2mL small opening screw-thread matching vials (ND8)----I250 IP150

Used with 9mm open-top 2mL wide opening short screw-thread matching vials (ND8)----I300 IP200

directly put the inner insert into the sample vial when sampling . That is an economic choice for limited volume.

8mm inner cannula and small mouth opening 2mL vials matching thread using (ND8) -I250 & IP150 short thread with 9mm wide-mouth opening 2mL vials

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography, etc. 1.5ml Polypropylene Short Thread Vial with slightly concave shaped bottom. Usable in HPLC as a possible alternative to silanized glass vials for pH-sensitive and aqueous samples. .TPX has a crystal clear transparency and good chemical resistance Any combination of our plastic vials with one of our seals can be obtained as a 2in1 KIT Also available our so-called TopSerts Vials: transparent and amber TPX Micro-Vials with a Glass Insert Special Push-On Cap with thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11

►Leaflet Download