Glass fiber filter- MGB
Products
Click image to view full sizeItem-Name:
Specification:
Glass fiber filter - MGB
Specification:Glass fiber filter - MGB
Pore Size：1.0um
Package：100/PK
More-Details:
◆ Glass fiber filter - MGB
These glass microfiber filters are three times thicker than MGA with higher wet strength and significantly increased loading capacity. Combines fine particle retention with good flow rate. Particularly useful where liquid clarification or solids quantification is required for heavily loaded fine particulate suspensions. Can be used as a finely retentive membrane prefilter. Used in LSC techniques where high loading capacity is required.
◆ Micro-Glass Fibers without Binder
Grade | Basis Weight (g/m2) | Thickness (mm) | Particle Retention in Liquids (μm) | Pressure Drop* ( |
| MGB | 143 | 0.70 | 1.0 | 95 |
*A = 10 cm2, flow velocity 400 cm3/sec
Grade | Application |
| MGB | Filtration of suspended solids in water, waste water analysis, pre-filters for membranes, suitable for filtration of large volumes. |
◆ Cross reference:
Finetech | Whatman | E-D Scientific Specialities | Advantec |
MGB | GFB | 121 | GA-140 |
More Products
Glass fiber filter - MGC
◆Glass fiber filter-Grade MGC Slightly more retentive than MGA and MG 550 HA. Combines fine particle retention with good flow rate. The standard filter for the collection of suspended solids in potable water and natural and industrial wastes. Fast and efficient clarification of aqueous liquids containing low to medium levels of fine particulates can be carried out in the laboratory. Used in cell harvesting and liquid scintillation counting techniques where more retentive medium loading capacity filters than MGA and MG 550 HA are required. ◆Micro-Glass Fibers without Binder Grade Basis Weight (g/m2) Thickness (mm) Particle Retention in Liquids (μm) Pressure Drop* (mbar) MGC 52 0.24 1.2 55 *A = 10 cm2, flow velocity 400 cm3/sec Grade Application MGC Standard filter for the clarification and monitoring of waste water and water, scintillation counting on the filter, cell harvesting, hydrocarbon analysis where cellulose fibers are an inconvinience. ◆ Cross reference: Finetech Whatman E-D Scientific Specialities Advantec MGC GFC 131 GC-50
Glass fiber filter - Grade MGD
◆Glass fiber filter Grade - MGD The MGD Glass microfiber filter is considerably faster in flow rate and overall filtration speed than Cellulose filter papers of similar particle retention. The filter is thick and consequently exhibits a high loading capacity. Designed as a membrane prefilter and available in sizes to fit most holders. MGD will provide good protection for finely retentive membranes. Can be used in combination with MGB to provide very efficient graded prefilter protection for membranes. ◆Micro-Glass Fibers without Binder Grade Basis Weight (g/m2) Thickness (mm) Particle Retention in Liquids (μm) Pressure Drop* (mbar) MGD 120 0.53 2.7 140 *A = 10 cm2, flow velocity 400 cm3/sec Grade Application MGD Universal membrane pre-filter material ◆ Cross reference: Finetech Whatman E-D Scientific Specialities Advantec MGD GFD 141 GD-120
Glass fiber filter - MGF
◆ Glass fiber filter - MGF This glass fiber filter has a very rapid flow rate and an extremely high loading capacity. Because of the tight specification of 0.7 µm particle retention and pure borosilicate glass structure, MGF is the material upon which the EPA Method TCLP 1311 for Toxicity Characteristic Leaching Procedure was developed. It remains today the filter of choice. Recommended for DNA binding and purification. Very effective in filtering finely precipitated proteins,MGF can be used in conjunction with MGD as a prefilter for the successful clarification of extremely difficult biochemical solutions and fluids, and nucleic acids. ◆ Micro-Glass Fibers without Binder Grade Basis Weight (g/m2) Thickness (mm) Particle Retention in Liquids (μm) Pressure Drop* (mbar) MGF 75 0.45 0.7 120 *A = 10 cm2, flow velocity 400 cm3/sec Grade Application MGF Higher efficiency in particle retention for smaller particles than other glass fiber grades, clarification of protein solutions, filtration of liquids prior to HPLC ◆ Cross reference: Finetech Whatman E-D Scientific Specialities Advantec MGF GFF 151 GD-75
Finetech® Glass Microfiber Filter
◆ Finetech®-Glass Microfiber Filter Micro-glass fiber filters offer high efficiency, submicron particle retention combined with high permeability and high dust holding capacity . Micro-glass filters are made of high-purity borosilicate glass microfibers that are biologically inert and resistant to most solvents and reagents with the exception of hydrofluoric acid and highly concentrated alkali solutions. Binder-free grades are temperature resistant to about 500℃.Grade MG 550 HA can withstand temperatures to 550℃. Grades with binders can resist temperatures of about 180℃ and brief exposures to 250℃. ◆ Micro-Glass Fibers without Binder Model No. Basic Weight (g/m²) Thickness (mm) Particle Retention in Liquids (um) Pressure Drop* (mbar) MGA 52 0.23 1.6 38 MGB 143 0.70 1.0 95 MGC 52 0.24 1.2 55 MGD 120 0.53 2.7 140 MGF 75 0.45 0.7 120 MGG 65 0.28 1.5 30 MG 550-HA 65 0.3 1.5 - A = 10 cm², flow velocity 400 cm²/sec ◆ Cross Reference Finetech Whatman E-D Scientific Specialotoes Advantec MGA GF/A 111 GA-55 MGB GF/B 121 GB-140 MGC GF/C 131 GC-50 MGD GF/D 141 GD-120 MGF GF/F 151 GF-75 MG 550-HA 934-AH 161 N/A ► Leaflet Download
Glass Microfiber filters - 934AH
General description The fine particle retention of this popular grade is superior for its high retention efficiency at high flow rates and its high loading capacity. This is a smooth surface, high-retention borosilicate glass microfiber filter which withstands temperatures over 500°C. Used for determining total suspended solids in water, removal of turbidity, and filtration of bacterial cultures. Grade 934-AH is used for a wide range of laboratory applications. It is recommended for water pollution monitoring, cell harvesting, liquid scintillation counting, and air pollution monitoring. 934-AH Glass Microfiber filters are suitable for suspended solids analysis. These filters also permit rapid passage of very large sample volumes without blockage for the collection of suspended solids in potable, natural, and industrial waters. Specified in standard methods* for determining total suspended solids in water, 934-AH Glass Microfiber Filters are excellent for the removal of turbidity and filtration of bacterial cultures. The fine particle retention of this popular grade is superior to any cellulose filter of similar rating and is capable of high retention efficiency at high flow rates.934-AH is now available in a RTU (ready to use) format for your Total Suspended Solids. Features and benefits Features and benefits • Excellent fine particle retention: allows for high particleretention efficiency when filtering large volumes. • Binder-free, high-grade borosilicate glass microfiber:enables use with temperatures up to 550ºC. • Available in a wide range of sizes: in circle and sheet formats. • High loading capacity: capable of processing very turbid streams. • Low fiber shedding: improves quality assurance of test results. Other Notes Field of Use : For internal research use only. Products are not intended for diagnostic use or resale. Legal Information 934-AH is a registered trademark of GE Healthcare Whatman is a registered trademark of GE Healthcare ◆Applications• Water pollution monitoring• Air pollution monitoring• Cell harvesting• Liquid scintillation counting *The most widely used filter for establishing water quality in suspended solids contentand related measure (Standard Method 2540D and EPA Method 160.2). Total suspended(non-filterable) solids are defined as those which are retained by a standard glassmicrofiber filter without organic binder. ◆Typical data Weight (g/m2) 64 Thickness (µm) 435 Particle retention (µm) 1.5 Filtration speed (Sec/100 ml)* 47 DOP penetration (0.3 µm particle) 0.02% ◆Surface SmoothHerzberg test at 10 cm hydrostatic head
Glass fiber filter - Grade MG 550 HA
◆ Detailed information MG 550 : Withstands temperatures till 550℃. Recommended for determining total suspended solids in water(TSS/standard method 2540D) MG 550 is used for determining total suspended solids in water, removal of turbidity, and filtration of bacterial cultures. Grade 161 is used for a wide range of laboratory applications. It is recommended for water pollution monitoring, cell harvesting, liquid scintillation counting, and air pollution monitoring. ◆ Features and benefits • Excellent fine particle retention: allows high particle retention efficiency when filtering large volumes • Binder-free, high-grade borosilicate glass microfiber: enables use with temperatures up to 550ºC • Available in a wide range of sizes: in circle and sheet formats • High loading capacity: capable of processing very turbid streams • Low fiber shedding: improves quality assurance of test results ◆ Applications • Water pollution monitoring • Air pollution monitoring • Cell harvesting • Liquid scintillation counting Grade Basis Weight (g/m2) Thickness (mm) Particle Retention in Liquids (μm) Pressure Drop* (mbar) MG 550 HA 65 0.3 1.5 - ◆ Cross reference: Finetech Whatman E-D Scientific Specialities Advantec MG 550 HA 934 AH 161 n/a
Glass fiber filter - MGA
◆ Glass fiber filter - MGA Finetech® MGA glass microfiber filters feature fine retention. Those filters are suitable for water quality parameter measurement and air filtration applications. Suitable for a wide range of liquid and air filtration applications Nominal particle retention of 1.6 µm We offer a variety of binder-free glass microfiber filters for different sample types and analysis needs. For higher wet strength, increased loading capacity, or different particle retention. Filters that combine high loading capacity with fine particle retention are well suited for applications such as water quality parameter measurements involving large sample volumes. Grade MG filters can function as wastewater filters or serve as filters in the following applications: * Water pollution monitoring of effluents * Filtration of water, algal and bacterial cultures, and proteins * Foodstuff analysis * Radioimmunoassay of weak β emitters * Gravimetric determination of airborne particulates * Stack sampling and absorption methods of air pollution monitoring ◆Micro-Glass Fibers without Binder Grade Basis Weight (g/m2) Thickness (mm) Particle Retention in Liquids (μm) Pressure Drop* (mbar) MGA 52 0.23 1.6 38 *A = 10 cm2, flow velocity 400 cm3/sec Grade Application MGA Highly efficient for general laboratory filtration, clarification of buffer and reagent solutions corresponds to many international standards for air and water pollution monitoring. Foodstuff analysis, filtration of algae, bacteria cultures, proteins ◆ Cross reference: Finetech Whatman E-D Scientific Specialities Advantec MGA GFA 111 GA-55
